Thread: Nuvi Rom Cure by batch (if Nuvi booting and reebooting for wrong map / wrong gupdate.gcd etc)

@MHC
For easy fix go here: [Only registered and activated users can see links. ].

Thank You Neil.

Appreciate your help. Will read up to learn about Flashing my unit and feedback my results.

P/S: I ran into a trouble already. I don't know my unit HWID... guess I have to give it my best shot...

You can read it from gupdate.gcd from your backup, if you have it, with RGNtool by turboccc

Code:

Please Login or Register to see the links

Or with G7ToWin program than can communicate with your nuvi and can see the HWID.
see post n2 here
[Only registered and activated users can see links. ]

@MHC
Best not to guess the HWID. Usual chipsets in EU, US, AU etc are 0827 ('non-MTK') or 1091 (MTK) and you should check to ensure you use the correct one. Do as Caty says, or, you can get it another easy way from a backup via the device XML file. Browse the Garmin folder, look for 'GarminDevice.xml' and open it with a web browser. The HWID is shown near the top, look for the 4 figures 'PartNumber':

-<Device xsi:schemaLocation="http://www.garmin.com/xmlschemas/GarminDevice/v2 http://www.garmin.com/xmlschemas/GarminDevicev2.xsd">
<Model><PartNumber>006-BXXXX-00</PartNumber>
<SoftwareVersion>760</SoftwareVersion>
<Description>n�vi 265W</Description>

That also shows the firmware version immediately after the HWID, in example above it's FW v7.60.

In a healthy working 265W it's even easier to get it from the Diagnostic Menu: Press the battery icon (if charging, press just to left of clock) for about 5 seconds, press 'Next'> 'Start test'> 'More'. The first 3 entries will show which chipset (HWID) you have and the fw version immediately behind it. Or get the Device XML directly.

So many ways to find the HWID that it's almost confusing (in a good way).

Also g7towin.exe helps. Enter pre-boot mode and press GPS->Get GPS ID. It's better when curing a Garmin device. Don't know why it's not mentioned here.