Thread: Power Acoustic P-81ACRD

igo_8.3.2.89704_mips_cracked find over the internet , make new folder asimap, and rename original asimap something else, unzip new software in new asimap folder and rename navione.exe to asimap.exe.

link
[Only registered and activated users can see links. ]

Thanks, I try this method with the link above and its working. Another question which iGo map version should I use for NA.
Thx.

[Only registered and activated users can see links. ] are OK for this version.

Yes I have this map, The problem iGo map can't detect my GPs. I setup com and bud rate to Auto in sys.ini still not detect it.
Thanks.

First try to remove the "port" and "baud" line completely.

If doesn't work try to change the port number each from 1 to 9.

Next step try to change the baud to "4800" with all the ports.

If still no result, try to add this line to the [GPS] section:
protocol = "NMEA"

I know this is many options and not easy to manage, but there are no easy solution for this device as far as I know. Unfortunately I don't know any port scanning program what would run on this.

I followed your steps and not lock to Sat. I notice that when Navi start save the setting in save directory file system.ini and find gps at baud 57600 and port 0, when I changed to ports 1-9 still cant locate the satellite.
Don't know what else to do ?. Any other cracked iGo version I can use ?
Thx.

From [Only registered and activated users can see links. ] topic, the wince section. AlpineNavi iGO_9.6.30.462695 looks promising for example.