TomTom v940/941/942 Maps discussion, post here your questions.

**khamito** · 16th January 2015, 09:52 PM

Yes, i copied everything from the internal memory to the SD card. There is ttgo.bif (03.01.2000 - 2 ko) Navcore is activated with FastActivate.
Only option 2 when it's trying to patch dct ERROR on this Western_Europe_1GB-100207 went wrong..

Should i erase the SD card and put only the Western_Europe_1GB_940_5993 folder in it and ttgo.big ?

Thanks a lot for your help.

**QUIN1965** · 17th January 2015, 10:29 AM

Hello in M.I. (internal memory) can be activated gps NavCore.
In the SD you can have tantos maps as capacity is 4GB etc.. if you must have the ttgo in sd to activate the maps, greeting

**biggerdave** · 17th January 2015, 11:27 AM

Start again; because your One XL can ONLY run from internal OR from SD card (not both as the later devices can) copy everything from your internal memory to the SD card (apart from old map folders to save space) then add the newly downloaded map FOLDER and fastactivate & run it again

**QUIN1965** · 17th January 2015, 12:17 PM

Hello do what the teacher biggerdave install everything back in MI or SD here is a tutorial for this gps recommend NavCore 8562 test and comment

GPS ONE---XL---x00---x10 M.I./SD
[Only registered and activated users can see links. ]

**khamito** · 17th January 2015, 04:24 PM

Allright,

Worked this time! What i did wrong all this time was to keep the older Western_Europe_1GB folder and only replace new files in it.

How can i check if it's right map now inside the GPS ?

Should i also update navcore to 8562 ?

Thank you very much

**QUIN1965** · 17th January 2015, 04:47 PM

Hi you can try on the SD NavCore 8562

@ khamito

How can i check if it's right map now inside the GPS ?

The version of NavCore have it here:
Touch the bottom right corner of the view Driving
This post requires you to click the "LIKE this post" button and hit F5 to read this content.

Touch version.
This post requires you to click the "LIKE this post" button and hit F5 to read this content.

The device code is displayed on the screen version.
This post requires you to click the "LIKE this post" button and hit F5 to read this content.

**khamito** · 17th January 2015, 08:42 PM

Ok, so :

Installation of Bootloader 5.5128 ok
I downloaded navcore 8562, deleted all files from SD card, copied everything of navcore 8562 to SD card.
Installed map again and activated it with Fastactivate

Everything went fine apparently but now GPS keep turning on with a picture of a Citroen car then turn on Welcome to TomTom ONE XL then keep shutting down.

Did i do something wrong somewhere ??

**QUIN1965** · 17th January 2015, 10:03 PM

See here this post
Hello to reset the gps
[Only registered and activated users can see links. ]

**khamito** · 17th January 2015, 10:23 PM

I did this and it helped me shutdown the GPS.
I restored the backup and it's working again.

I tried to install Navcore 8562 again step by step :

Delete all files
copy navcore 8562 files to SD
Turn on GPS, says : no map
Then copy map and fastactivate
and did all 4 steps again

Then same problem, GPS turn on, message : Welcome to TomTome One XL and it restart all over.

Don't know what i do wrong ?

Backup with old navcore 8.010 + Bootloader 5.5128 + Western Europe 940.5993 is working fine.

**QUIN1965** · 18th January 2015, 09:51 AM

Hi try this another NavCore have some luck.
Navcore 8562
This post requires you to click the "LIKE this post" button and hit F5 to read this content.
pw: Mazul

Thread: TomTom v940/941/942 Maps discussion, post here your questions.

Thread Tools

Display

Advertissements

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions