Thans BIGGERDAVE for your reaction.
However .... you did'nt awnser my three questions. Now I still hesitate to upgrade my bootloader. So I would apreciate more respons to my questions.
Changing bootloaders CAN be dangerous & irreversible.
However, if all you need to do is use anSDHC card in you Rider you're safe to use my method here [Only registered and activated users can see links. ]
Remember:- DO NOT just add this bootloader system file to your SDHC card and expect it to run. You MUST first load it to your original SD card or internal memory and start your device. THEN it can read SDHC's.
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
Thans BIGGERDAVE for your reaction.
However .... you did'nt awnser my three questions. Now I still hesitate to upgrade my bootloader. So I would apreciate more respons to my questions.
Simple said : as long as you have no UBS transfer problems leave the BL alone and remove any "system" file from installations before you start
Password for all my files: downunder
Basically you can/should stick with the 5.5120. Once that bootloader is in your internal memory it can only ever be up, not, downgraded (unless you're a gambler AND really DO understand what you're doing).
You cannot "backup" your bootloader although you could "save" the system file to your desktop but that doesn't mean you can roll back to it.
As has been said, playing with bootloaders is dangerous so if you don't know what you're doing, forget it!
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
What BL do I need for a Carminat?
tia Henk
Hi ... thanks, it works for me well. Before I had higher version of bootloader 5.5229. Now I have following configuration:
Tom Tom One v3
App 9.450.890926
(2008, 3/21/2012)
32 MB RAM (free: 11:3 MB)
GPS v1.20,
Boot 5.5128
Map: Europe_885_4055
My problem is different and bootloader version do not solved it; initialy I thought is an issue with display "driver" after I updated from Navcore 7.903 (BootLoaderVersion=50500) to 8.560 (BootLoaderVersion=55229) my display looks like I have "interlaced" resolution setup (one horizontal line visible, next one is not visible, third line visible ... and so forth).
Its anybody on this forum with similar issue?
-Nope...
Try the TT clear flash tool 3 times.
If still the same open your TT and disconnect the battery for 15 minutes.
Check again, if you are lucky one of two will help, if not you might have a faulty device.
Password for all my files: downunder
Can you downgrade as mine seems to be really slow transferring between tomtom xl non sd card to pc and vice versa?
Hi to all,
I have GO 710, bl v 5.5229, app v9.160, maps 890 fully working but receiving gps signal is little slower.
Is it safe an useful to update it to higher version like 5.5242 ->, anybody tested it?
THX for your answers.
Bookmarks