How to make a RESET or HARD-RESET

**QUIN1965** · 14th May 2014, 05:32 PM

How to make a RESET or HARD-RESET
by Txanton

Hi again mates , the goal of this tutorial is to show you where those tiny holes to make the reset in our devices .

For that we need a clip or some other rigid, hard and fine utensil while that between us in the hole and we will not double .

Normally when you want to reset it because our device has been locked , which will already be on, but it may be the case that is not blocked and if we is malfunctioning and forum advise us to do a reset or even a Hard -Reset , in which case it will turn our apparatus .

It is advisable to have charged the battery , but not indispensable.

Reset: With the clip and the gadget on, we put through the hole until it is restarted , at which point we get the clip.

Hard- Reset: keeping the power button while our apparatus we introduce the clip into the Reset hole until you reboot , at which point we get the clip and will loose power button.

Thanks mate Hellboy , which I am extremely grateful for their invaluable help and advice in making this tutorial, we can also see :

Official version of TomTom Device Reset .
Go Live 1005, Go 1005, Go Live 1000, Go 1000, Go 950/750/550, Go 940/740/540, XXXL 540 S/530 S, XL LIVE IQ Routes/340 LIVE, XL IQ Routes / 340, XL (30-Series) / 330, One IQ Routes / 140, One (30-Series)/125/130, Rider Pro, Urban Rider, Blue&Me TomTom

To reset your TomTom device, do the following:
1. Sure the battery is properly charged.
Charge your device for at least 2 hours before trying to turn it back on. Make sure the charging device is turned on.
2. Reset your device.
Press and hold ON / OFF until the device is turned on. This may take more than fifteen seconds

Go 930/730/530, Go 920/720/520, Go 910/710/510, Go 300/500/700, ONE XL, One 3rd Edition, One 2rd Edition, One 1rd Edition, GO I90, ECLIPSE II, DAIHATSU, ECLIPSE, TOYOTA

To reset your TomTom device, do the following:
1. Sure the battery is properly charged.
Charge your device for at least 2 hours before trying to turn it back on. Make sure the charging device is turned on.
2. Remove the SD card.
If your device uses an SD card, remove it.
3. Reset your device.
Use a straightened paper clip or something similar to press the reset button for 15 seconds. See illustrations below to find the reset button.
4. Turn on the device.
Hold the button on / off for 5 seconds, at least.
5. Insert the SD card.
If your device uses an SD card, insert the SD card.

I attached some images that you may know I find the reset hole, which will be located at the bottom of our device

imagen1aj

Vía LIVE 120, Vía 110/120/125

To reset your TomTom device, do the following:
1. Sure the battery is properly charged.
Charge your device for at least 2 hours before trying to turn it back on.
2. Reset your device.
Press and hold ON / OFF until the device is turned on. This may take more than fifteen seconds.

XL IQ Routes 2

To reset your TomTom device, do the following:
1. Sure the battery is properly charged.
Charge your device for at least 2 hours before trying to turn it back on. Make sure the charging device is turned on (except for RIDER who has charge indicator).
2. Reset your device.
Use a straightened paper clip or something similar to press the reset button for 15 seconds. See illustrations below to find the reset button.
3. Turn on the device.
Hold the button on / off for 5 seconds, at least.

Reset button location

The reset button is on the bottom of your TomTom device.

1310xliqr2detail

Start 2/ EASE, Start
1. Goal mount the device by pressing the release button on the mount.
20080250

2. Remove the back cover of the device by holding the sides and pushing the device through the central area of the housing.
14641944

3. To press the reset button, use a straightened paper clip or similar object. The reset button is located at the base of your device.
85394739

RIDER 1st Edition, RIDER 2st Edition

To reset your TomTom device, do the following:
1. Sure the battery is properly charged.
Charge your device for at least 2 hours before trying to turn it back on.
2. Remove the SD card.
If your device uses an SD card, remove it.
3. Reset your device.
Use a straightened paper clip or something similar to press the reset button for 15 seconds. See illustrations below to find the reset button.
4. Turn on the device.
Hold the button on / off for 5 seconds, at least.
5. Insert the SD card.
If your device uses an SD card, insert the SD card.

Reset button location

The reset button is on the bottom of your TomTom device.
24297420

Sony XNV Navigation Module
To restart the navigation module, remove the bracket by pressing the release button. Then press the reset button on the back of the navigation module for at least 10 seconds. Replace the navigation unit in the holder.

42166985

Credits Orni

I hope you have been helpful and suggestions and corrections are accepted.

I want to clarify that everything I know and share I did not make it, I've taken from different foreros this and other forums and I've done nothing but learn from them and copy them, so I am extremely grateful. Specifically and especially to Hellboy, Charly2007, jenito and peers.

nyky · 25th May 2015, 08:31 AM

How to make a RESET or HARD-RESET

How do I reset my device if it freezes or does not start?
How to reset your device.

GO 6000/6100
GO 5000/5100
GO 600/610
GO 500/510
GO 400
GO 60
GO 50
GO 40
START 60
START 50
START 40
GO LIVE 800 series
GO 1000 series
GO 2505 (USA)
GO 2405 (USA)
GO 950/750/550
GO 940/740/540
Via series
XXL 540 S/ 530 S
XXL IQ Routes / XXL Classic
XL LIVE IQ Routes / 340 Live
XL IQ Routes / 340
XL (30 - Series ) / 330
Start 20 / 60 Series
ONE IQ Routes / 140
ONE ( 30-Series ) / 125 / 130
RIDER 400, RIDER 40
RIDER, Rider Pro, Urban Rider
Blue&Me TomTom 2 series
Blue&Me TomTom (LIVE)

Step-by-step instructions

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again.

2.Reset your device.
Press and hold the On/Off button until you hear the drum sounds and the device restarts. This can take 30 seconds or more.

[Only registered and activated users can see links. ]

GO 930/730/630/530
GO 920/720/520

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.

2.Remove the SD card
If your device uses an SD card, remove it.

3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.

4.Turn your device on.
Press the On/off button for at least 5 seconds.

5.Insert the SD card
If your device uses an SD card, insert the SD card.

Where to find the reset button

The reset button is on the bottom of your TomTom device

1310gox20

GO 910/710/510

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.

2.Remove the SD card
If your device uses an SD card, remove it.

3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.

4.Turn your device on.
Press the On/off button for at least 5 seconds.

5.Insert the SD card
If your device uses an SD card, insert the SD card.

Where to find the reset button

The reset button is on the bottom of your TomTom device
1310gox10

GO, GO 300/500/700

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.

2.Remove the SD card
If your device uses an SD card, remove it.

3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.

4.Turn your device on.
Press the On/off button for at least 5 seconds.

5.Insert the SD card
If your device uses an SD card, insert the SD card.

Where to find the reset button

The reset button is on the bottom of your TomTom device
1310go

XL IQ Routes² / XL Clasic

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.

2.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.

3.Turn your device on.
Press the On/off button for at least 5 seconds.

Where to find the reset button

The reset button is on the bottom of your TomTom device.
1310xliqr2

ONE XL

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.

2.Remove the SD card
If your device uses an SD card, remove it.

3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.

4.Turn your device on.
Press the On/off button for at least 5 seconds.

5.Insert the SD card
If your device uses an SD card, insert the SD card.

Where to find the reset button

The reset button is on the bottom of your TomTom device.
2027onexl

Start2 / Start Classic /EASE
Start

[Only registered and activated users can see links. ]

Step-by-step instructions

To reset your TomTom device, do the following:
1.Remove the Mount from the device by pressing the release button on the Mount.
2027 start 01

2.Pull the back cover off the device by holding either side of the cover and pushing the device through the centre of the cover. 2027 start 04

3.Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. The reset button is on the bottom of your device. 2027 start 06

ONE 3 rd Edition

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.

2.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.

3.Turn your device on.
Press the On/off button for at least 5 seconds.

Where to find the reset button

The reset button is on the bottom of your TomTom device.
2027one3rd

ONE 2nd Edition
ONE 1st Edition

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.

2.Remove the SD card
If your device uses an SD card, remove it.

3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.

4.Turn your device on.
Press the On/off button for at least 5 seconds.

5.Insert the SD card
If your device uses an SD card, insert the SD card.

Where to find the reset button

The reset button is on the bottom of your TomTom device.
1310one2

RIDER 1st Edition, RIDER 2nd Edition

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again.

2.Remove the SD card
If your device uses an SD card, remove it.

3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.

4.Turn your device on.
Press the On/off button for at least 5 seconds.

5.Insert the SD card
If your device uses an SD card, insert the SD card.
Where to find the reset button

The reset button is on the bottom of your TomTom device.
1310rider

Carminat TomTom (LIVE)

To reset your device, switch off the car engine and then remove the memory card. Re-insert the memory card, wait 30 seconds and switch the car engine on again.

DAIHATSU,ECLIPSE,TOYOTA

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.

2.Remove the SD card
If your device uses an SD card, remove it.

3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.

4.Turn your device on.
Press the On/off button for at least 5 seconds.

5.Insert the SD card
If your device uses an SD card, insert the SD card.

Where to find the reset button

The reset button is on the bottom of your TomTom device.

1310eclipse

ECLIPSE II
GO I90
Toyota Aygo Connect Multimedia

To reset your TomTom device, do the following:
1.Check that the battery is charged properly.
Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.

2.Remove the SD card
If your device uses an SD card, remove it.

3.Reset your device.
Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.

4.Turn your device on.
Press the On/off button for at least 5 seconds.

5.Insert the SD card
If your device uses an SD card, insert the SD card.

Where to find the reset button

The reset button is on the bottom of your TomTom device.
1310eclipse2

Mazda Navigation System NB1 (LIVE)

To reset your device, switch off the car engine and then remove the memory card. Re-insert the memory card, wait 30 seconds and switch the car engine on again.

Sony XNV Navigation Module

To reset your navigation module, first remove it from the cradle by pressing the release button. Then press the reset button on the back of the navigation module for at least 20 seconds. Push the navigation module back into the cradle.

1310xvn

Source

Code:

Please Login or Register to see the links

Thread: How to make a RESET or HARD-RESET

Thread Tools

Display

How to make a RESET or HARD-RESET

Advertissements

How to make a RESET or HARD-RESET

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions